TAJIMA TMAR-KC
AVAILABLE IN 2, 4, 6, & 8 HEAD VERSIONSThe Tajima TMAR-KC Type 2 series is the world’s first machine to incorporate DCP (Digitally Controlled Presser foot. DCP takes controlling your embroidery parameters to a new level and controls the stitching like never before when using thick or thin Fabric or Thread combinations in your designs. 3D Embroidery is much simpler with DCP. Other features are a full touch screen, Head control Buttons and pickerless trimmers.
STANDARD FEATURES OF TMAR-KC TYPE 2 MULTIHEAD MACHINES
40,000,000 Stitch Memory
Auto Colour Change
Auto Thread Break Sensor
Auto Thread Trim
Barcode Ready
Touchscreen Panel
High Speed Rotary Hook
LAN Enabled
Quick Changeover
Spiral Tubes
USB Enabled
VERSATILE CAP DRIVER
The cap driver incorporates a lower shaft and a third locking pin to stabilize the cap during embroidery to enhance quality and allows cap production at high speeds.
.png)
TAKE-UP LEVER GUARD
Covers mounted over the take-up levers prevent thread from cross tangling during high speed production and improve safety in the work-place.
THREAD BREAK DETECTION
A sensor constantly monitors the thread movement. If the upper or lower thread is broken, the system instantly stops stitching, allowing correction and back up if needed to preserve stitch quality. The sensitivity is adjustable on the operation panel.
.png)
THREAD LOCKING SYSTEM
The Thread Locking System secures the thread after a trim to help prevent the thread pulling out during needle startup.
KEY FEATURES OF TFMX-IISC MULTIHEAD MACHINES
TRIMMED NEEDLE PLATE
A shorter distance between the needle hole and the edge of the trimmed needle plate offers an increased embroidery area on many items.
STEEPER TILT HEAD
The Steeper Tilt Head angles the bill of a cap and allows stitching closer to the edge of the bill, increasing the embroidery area.
.png)
SPECIFICATIONS FOR TMAR-KC MULTIHEAD MACHINES
TMAR-KC 4 HEAD STANDARD
NEEDLES 15
MAX SPEED 1100 SPM
HEAD INTERVAL 360mm
TUBULAR EMB. FIELD 439mm x 279mm/ 17.3” x 10.9”
CAP EMBROIDERY FIELD 75mm x 360mm / 3” x 14.2”
MACHINE DIMENSIONS 108.2” W x 53” D x 65” H
MACHINE WEIGHT 486 kgs
MIN. DOOR CLEARANCE 34” W
TMAR-KC 6 HEAD STANDARD
NEEDLES 15
MAX SPEED 1100 SPM
HEAD INTERVAL 360mm
TUBULAR EMB. FIELD 439mm x 279mm/ 17.3” x 10.9”
CAP EMBROIDERY FIELD 75mm x 360mm / 3” x 14.2”
MACHINE DIMENSIONS 129.1” W x 53” D x 65” H
MACHINE WEIGHT 656 kgs
MIN. DOOR CLEARANCE 34” W
TMAR-KC 4 HEAD STRETCH
NEEDLES 15
MAX SPEED 1100 SPM
HEAD INTERVAL 500mm
TUBULAR EMB. FIELD 439mm x 419mm/ 17.3” x 16.5”
CAP EMBROIDERY FIELD 75mm x 360mm / 3” x 14.2”
MACHINE DIMENSIONS 128.3” W x 53” D x 65” H
MACHINE WEIGHT 642 kgs
MIN. DOOR CLEARANCE 34” W
TMAR-KC 8 HEAD STRETCH
NEEDLES 15
MAX SPEED 1100 SPM
HEAD INTERVAL 500mm
TUBULAR EMB. FIELD 439mm x 419mm/ 17.3” x 16.5”
CAP EMBROIDERY FIELD 75mm x 360mm / 3” x 14.2”
MACHINE DIMENSIONS 207” W x 53” D x 65” H
MACHINE WEIGHT 1126 kgs
MIN. DOOR CLEARANCE 34” W
LED NEEDLE BASE LIGHT
The LED Needle Base Light illuminates the needle area and enables the operator a better view of the item being embroidered.
SLIM CYLINDER BED
The Slim Cylinder makes it possible to embroider on smaller objects such as socks, gloves, and pockets.The Slim Cylinder is 12mm narrower than the original Tajima cylinder.
TMAR-KC 8 HEAD STANDARD
NEEDLES 15
MAX SPEED 1100 SPM
HEAD INTERVAL 360mm
TUBULAR EMB. FIELD 439mm x 279mm/ 17.3” x 10.9”
CAP EMBROIDERY FIELD 75mm x 360mm / 3” x 14.2”
MACHINE DIMENSIONS 157.4” W x 53” D x 65” H
MACHINE WEIGHT 834 kgs
MIN. DOOR CLEARANCE 34” W
TMAR-KC 2 HEAD STRETCH
NEEDLES 15
MAX SPEED 1100 SPM
HEAD INTERVAL 500mm
TUBULAR EMB. FIELD 439mm X 419mm / 17.3” x 16.5”
CAP EMBROIDERY FIELD 75mm x 360mm / 3” x 14.2”
MACHINE DIMENSIONS 88.9” W x 53” D x 65” H
MACHINE WEIGHT 448 kgs
MIN. DOOR CLEARANCE 34” W
TMAR-KC 6 HEAD STRETCH
NEEDLES 15
MAX SPEED 1100 SPM
HEAD INTERVAL 500mm
TUBULAR EMB. FIELD 439mm x 419mm/ 17.3” x 16.5”
CAP EMBROIDERY FIELD 75mm x 360mm / 3” x 14.2”
MACHINE DIMENSIONS 167.7” W x 53” D x 65” H
MACHINE WEIGHT 813 kgs
MIN. DOOR CLEARANCE 34” W